Jane
Time: 1 day Difficulty: easy 🔧
@roomixdiy Step by step we're there with you! 💪 #stairdecor #hallwaymakeover #allinone #easydiy #roomixdiy
♬ Beat Automotivo Tan Tan Tan Viral - WZ Beat
1. With your glass cutter score an even line around the bottle
2. Heat the bottle with the blow torch. Shock the bottle under cool water. Repeat if necessary until the bottle is ready to pop apart.
3. Sand the sharp edges down, remember to use safety gear, safety glasses & mask. You may also want to wear gloves. Then rinse the sanded bottle parts.
4. Put the top of the bottle upside down in the other part of the bottle. Cut a quarter inch of cotton wicking cord, tie it in a knot, and feed it through.
5. Add some substrate, then add your plant, add more substrate making sure they are no air pockets. Water the plant, fill the reservoir and you're done!
Personalise project to find out exactly what tools you'll need, typically requires:
Mitre box
Pin hammer
Caulking gun
Personalise project to find out exactly what materials you'll need, typically requires:
Pine dado rail: 18.5 x 69mm
Pine panel mouldings: 11x32mm
Wood glue